Tools/Parts Needed:

1 - Philips head screwdriver

There are 6 Phillips heads screws holding the glovebox in place (red).  Remove them and carefully jiggle and pull the glovebox out.  Disconnect the 2 connectors attached to the box (one goes to the flashlight charger and the other goes to the glovebox light.  Put the glovebox aside.

Now, if you look close enough at the firewall, you should be able to see that big rubber circle you pushed the 2 signal wires through from the engine compartment (Look really far back in the section circled in red).

Pull the wires through.  Feed them behind the right wall of the center console (red) and pull them out the front of the console area (blue arrow) you just ripped out in the previous section.